Still FM-X EW Series Page 242 Original Instructions Manual Download

Page: 242 / 360

Operation

Handling the lithium-ion battery (variant)

Safety regulations for handling the

lithium-ion battery

First-aid measures

WARNING

Risk of injury!
Escaping gases can lead to breathing difﬁculties.

Course of action required if gases or liquids

escape
– Immediately ventilate the area or go out into

the fresh air; in more serious cases, call a

doctor immediately.

Skin irritation can occur in the event of contact

with the skin.
– Thoroughly wash the skin with soap and

water.

Eye irritation can occur in the event of contact

with the eyes.
– Immediately rinse eyes thoroughly with

water for 15 minutes, then consult a doctor.

Maintenance personnel

The lithium-ion battery is virtually mainte-

nance-free and can be charged by the driver.
– If you have any questions, please contact

your authorised service centre.

– The handling instruction for the battery and

the operating instructions for the battery

charger must be followed.

– Observe the following safety regulations

when maintaining, charging and changing

the battery.

230

50988078001 EN - 10/2018

Summary of Contents for FM-X EW Series









































































































































































































































































































































































Search results

Summary of Contents for FM-X EW Series

Reviews:

Related manuals for FM-X EW Series

Brands by name

Popular brands

Still FM-X EW Series, Original Instructions Manual

Search results

Summary of Contents for FM-X EW Series

Reviews:

Related manuals for FM-X EW Series

Brands by name

Popular brands