Still FM-X EW Series, Original Instructions Manual, Page: 229 / 360

Operation
4
Connecting and disconnecting the battery male connector
the heavy-duty rollers must be placed under-
neath the drive wheel or underneath the posts
on the side of the truck. As the drive wheel
does not come into contact with the ground
when using this towing method, the brakes
can also no longer operate. Therefore, please
observe the safety information in the section
entitled "Releasing the brakes mechanically".
Emergency steering (variant)
A pinion shaft for turning the steering manually
is available as special equipment.
CAUTION
This emergency steering pinion may only be used
when the battery male connector is disconnected.
Connecting and disconnecting the battery male connector
1
Connecting the battery male connec-
tor
CAUTION
Risk of component damage!
If the battery male connector is connected while
the key switch is on (under load), a jump spark will
be produced. This can damage the contacts and
considerably shorten their service life.
– Do not connect the battery male connector while
the key switch is switched on.
– Ensure that the battery male connector and
the plug connection are dry, clean and free
of foreign objects.
– Insert the battery male connector (1) fully
into the plug connection on the truck.
CAUTION
There is a risk of short circuit if the
cables are damaged.
– Ensure that the battery cable is not
crushed when inserting the battery
tray into the truck.
50988078001 EN - 10/2018 217