Still FM-X EW Series, Original Instructions Manual

Page: 210 / 360

4
Operation
Lift height preselector/easy Target (variant)
Target
function. Once the selected target
height has been reached,
easy Target
Plus
is activated by pressing the F button
again. For the entire time that the F button is
pressed, the "Automatic tilt to centre position"
function is executed. If the fork is positioned
horizontally, the F button can be released.
After setting down the load on the racking,
easy Target Plus
is re-activated by
pressing the F button again. For the entire time
that the F button is pressed, the "Automatic tilt
to centre position" function is executed. If the
fork is positioned horizontally, the F button can
be released.
NOTE
As an alternative to using "easy Target Plus",
the function can also be executed using the
"Automatic tilt to centre position" button.
Prerequisites for use
To use the
easy Target
function, the "Lift
height preselector" option must be set up and
operational on the truck. The target heights
that need to be controlled using the easy
Target function must already be stored in the
lift height preselector.
To use the
easy Target Plus
function, the
"Automatic tilt to centre position" option must
also be set up and operational on the lift mast.
1
4
5
3
2
Approaching target heights using
"easy Target"
NOTE
If "easy Target" issues a short warning sound
when used, the fork must first be lifted once
using the main lift function so that the lift height
measurement is referenced.
198 50988078001 EN - 10/2018