Still FM-X EW Series, Original Instructions Manual, Page: 192 / 360

4
Operation
Battery change frame (variant)
Safe handling
WARNING
Risk of physical injury
Battery racks are used for moving heavy weights.
Especially for versions with manual drive, there
is always the risk of being trapped or crushing
hands or fingers. The greatest possible care must
therefore be taken to ensure that the battery is
against its stop and that when the battery moves
along the guides your fingers or hands are not in the
way.
So that the forces arising from the moving battery
are kept as small as possible, the horizontal position
of the truck and battery rack and the transfer height
must be matched as accurately as possible. The
speed of movement should be kept as low as
possible.
The locking mechanisms on the truck and battery
rack should always be used.
Under no circumstances should batteries be moved
on battery racks not intended for them.
Load capacity
Each battery rack is intended for a particular
battery type. This means that the dimensions
and the maximum permissible weight are
pre-determined. The dimensions and the tray
number of the intended battery are to be taken
from the order documentation. The maximum
load capacity of the battery rack and its net
weight are to be taken from the nameplate.
WARNING
Danger of overloading
For mobile use, it must be ensured that the load
bearing capacity of the truck to be used for trans-
portation is sufficient for the weight of the battery
and the net weight of the battery rack.
Area of application
Mobile use
The battery rack for the truck is intended for
mobile use only. For mobile use, the empty
battery rack is moved to the relevant truck. If
a double battery rack is available, a freshly
180 50988078001 EN - 10/2018