Still FM-X EW Series, Original Instructions Manual, Page: 178 / 360

4
Operation
Auxiliary equipment
Auxiliary equipment
FleetManager (variant)
FleetManager is an equipment variant and
can be fitted to the truck in different versions.
The description and operating information can
be found in the separate operating instructions
for the corresponding FleetManager versions.
FleetManager regulates the access authori-
sation for the truck. To activate the access
control, FleetManager must be put into opera-
tion immediately following delivery.
– To do this, observe the information in the
chapter entitled "Activating the access
control after delivery of the truck".
Shock recognition (variant)
The shock recognition is an equipment variant
of the FleetManager (variant) in which an
acceleration sensor is installed in the truck.
The acceleration sensor records the data
generated in the event of a shock (e.g. in
the case of a collision). This data can be
electronically read out and evaluated.
– Contact the authorised service centre for
more information.
Active Load Stabilisation ALS
(variant)
CAUTION
Risk of accident due to collision of the lift mast or
load with the racking or low ceilings.
Active vibration damping of the lift mast changes
the vibration characteristics of the lift mast and load
in comparison to the standard truck.
– When handling loads, take the varying vibration
characteristics into consideration.
166 50988078001 EN - 10/2018