![Still FM-X 10 N Original Instructions Manual Download Page 155](http://html.mh-extra.com/html/still/fm-x-10-n/fm-x-10-n_original-instructions-manual_1379940155.webp)
Handling loads
Safety regulations when handing
loads
The safety regulations for handling loads are
shown in the following sections.
DANGER
There is a risk to life caused by falling loads or if
parts of the truck are being lowered.
–
Never walk or stand underneath suspended loads
or raised fork arms.
–
Never exceed the maximum load indicated on the
capacity rating plate. Otherwise stability cannot be
guaranteed!
DANGER
Risk of accident from falling or crushing!
–
Do not step onto the forks.
–
Do not lift people.
–
Never grab or climb on moving parts of the truck.
DANGER
Risk of accident from a falling load!
–
When transporting small items, attach a load safe-
ty guard (variant) to prevent the load from falling
on the driver.
–
Use a closed roof covering (variant) in addition.
Before picking up a load
Load capacity
The load capacity indicated for the truck on
the capacity rating plate must not be excee-
ded. The load capacity is influenced by the
load centre of gravity and the lift height as well
as by the tyres, if applicable.
The position of the load capacity rating plate
can be determined from the identification
points; see the chapter entitled "Identification
points".
6210_003-030
Operating
4
Handling loads
143
50988078001 EN - 11/2021 - 10
Summary of Contents for FM-X 10 N
