Still EXV-CB 06, Original Instructions Manual

Page: 74 / 142

Reading the capacity label
CAUTION
Risk of loss of control
Before picking up a load, make sure that its weight
does not exceed the lifting capacity of the machine.
Refer to the nominal capacity specified on the truck's
capacity plate (1).
The values shown correspond to compact, homoge-
neous loads. They must not be exceeded. If they are
exceeded, the stability of the truck and the resistance
of the mast and the chassis are no longer guaran-
teed.
The distance of the load centre of gravity from the
back of the fork and the lift height determine the
maximum load to be lifted. Check that the pallet is in
good condition.
Nominal capacity
EXV-CB 06: 600 kg with 500 mm centre of
gravity.
EXV-CB 10: 1000 kg with 500 mm centre of
gravity.
EXV-CB 12: 1200 kg with 500 mm centre of
gravity.
EXV-CB 16: 1600 kg with 500 mm centre of
gravity.
Reading the capacity label
Example with an EXV-CB 16 fitted with a
standard 3200 mm mast:
●
(1) - Maximum lift height: 3200 mm.
●
(2) - Type of lift mast.
●
(3) - Distance from the back of the fork to
the load centre of gravity: 500 mm.
●
(4) - Maximum capacity on the forks:
1400 kg at a height of 3200 mm.


Use
4
Transporting loads
64 11718011551 EN - 02/2021 - 05