Still EXV-CB 06, Original Instructions Manual

Page: 61 / 142

Horn
The horn is positioned on the inner side of the
tiller.
It is used:
●
On routes where there is poor visibility
●
At junctions
●
In the event of immediate danger
–
Press the button (1).
The horn sounds.
Creep Speed function
This function makes it possible to manoeuvre
the truck in confined spaces.
The tiller remains in the vertical position.
–
Press the Creep Speed button (1) (tortoise
icon) on the tiller. Hold the button down.
–
Gently move the drive switch forwards or
backwards depending on the manoeuvre to
be performed.
NOTE
The traction speed can be set between 0.5
and 1.5 km/h. Contact the After-Sales Service
to change this.
The Creep Speed function cancels automati-
cally when the tiller is in the drive position.
CAUTION
Danger of forklift operator being trapped by the truck.
Gently move the drive switch to adjust the truck
speed. This prevents it moving too quickly towards
the operator.
NOTE


Use
4
Driving
51 11718011551 EN - 02/2021 - 05