Still EXV-CB 06, Original Instructions Manual

Page: 60 / 142

Braking
WARNING
The quality of the floor surface affects the braking
distance of the truck.
This should be taken into consideration when driving.
Electromagnetic braking
The electromagnetic brake is activated auto-
matically if one of the following conditions is
met:
●
The tiller is released. It is then brought back
to the braking position (3) by a gas spring.
●
The tiller is in braking position (1) or (3).
●
The drive switch is in the neutral position.
●
The power supply is cut off.
●
The forklift operator presses the emergency
off switch.
Braking by reversing the drive direction
Braking can be achieved by reversing the
drive direction:
–
Move the drive switch (1) or (2) in the oppo-
site direction until the truck stops.
Braking by releasing the drive switch
Braking can be achieved by releasing the
drive switch:
–
While travelling, completely release the
drive switch (1) or (2).
The brake is automatically activated. The truck
is immobilised.


Use
4
Driving
50 11718011551 EN - 02/2021 - 05