Still EXU-S 22 Original Instructions Manual Download

Page: 91 / 122

Application

Handling the battery

Safe parking

Park the truck securely before carrying out

work on the battery. The truck can only be

operated when the battery cover is closed

and the battery outlet is inserted. If the truck

is enabled for side removal of the battery, the

truck can only be operated once the battery

is ﬁxed in place properly using the battery

locking system.

Opening/closing the battery com-

partment

Opening the battery compartment

0148_003-028

– Turn the lock (1) 90° and lift the battery

cover (2).

Closing the battery compartment

WARNING

Danger of crushing.
When closing the battery door, there should be

nothing between battery door and edge of the

frame.

– Lower the battery compartment and turn the

lock 90°.

Battery charging with external

battery charger

CAUTION

Deep discharges damage the battery.
– The battery must be charged at once.

– Park the truck safely, refer to ⇒ Chap-

ter "Safe parking of the truck", P. 4-87.

– Open the battery compartment.
– Before charging, inspect the battery leads

and charging cables for damage and

replace them, if required.

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands