Still EXU-S 22 Original Instructions Manual Download

Page: 74 / 122

Application

Load placement

Driving up and down on an incline

0148_003-021

When driving up and down on an incline, the

load must always be carried uphill.
It is only permitted to drive on inclines which

are identiﬁed as suitable for trafﬁc and which

can be safely negotiated according to the

technical data of the truck. The driver must

satisfy himself that the ground is clean and

provides enough grip. It is not allowed to turn

on, park on or travel across inclines. Speed

must be reduced when driving down on an

incline.

Entering lifts

With this truck, the driver may only enter lifts

having a sufﬁcient load capacity and for which

the operator of the lift has given permission to

enter.

014

_00

-02

In the lift, the truck must be secured so that no

parts touch the shaft walls.
The clearance to the shaft wall must at least

100 mm.
The maximum weight of the truck (dead weight

without driver, the max. load.

EXU-22

3320 kg

EXU-24

3520 kg

Persons travelling with the lift at the same time

may enter the lift only after the truck is standing

securely and they must leave the lift ﬁrst.

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands