Still EXU-S 22 Original Instructions Manual Download Page 54

Page: 54 / 122

Application

Start-up

Connecting the battery plug (charg-

ing station)

0148_003-011

– Disconnect the battery socket (1) from the

charging station and insert into the plug on

the truck.

– The latch (2) must be closed.
– Close the battery cover (3).

Start-up

456

PRG

1047_00

-007

Turning on the truck

NOTE

The pallet truck is equipped with a digital

control and is taken into operation by entering

a driver code. The driver code consists of four

ﬁgures and is assigned by the pool manager.

It is used for normal use and operation of

the truck by the driver and operator. The

knowledge of the code is like a key and should

not be misused. Do not tell third persons your

driver code except if expressly ordered to do

so.

– It is possible to send other codes; see chap-

ter: ⇒ Chapter "Digicode control", P. 4-71.

50018043464 EN - 10/2017

Summary of Contents for EXU-S 22



























































































































Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands

Still EXU-S 22, Original Instructions Manual

Search results

Summary of Contents for EXU-S 22

Reviews:

Related manuals for EXU-S 22

Brands by name

Popular brands