Still EXU-H-18, Original Instructions Manual

Page: 92 / 142

Jacking
The truck must be jacked and chocked in or-
der to perform certain maintenance opera-
tions. Always make sure:
●
To use a jack with an adequate lifting ca-
pacity,
●
Make sure that the truck is parked on level
ground and is secured against rolling and
tipping.
WARNING
Electrical hazards
Disconnect the battery connector before lifting the
truck.
Lifting by the chassis
–
Position the truck so that the fork arms
touch the wall.
–
Lift up the truck until the wheels are no lon-
ger in contact with the ground.
–
Raise the truck with chocks.

Transporting the truck
CAUTION
Always switch off the ignition and disconnect the bat-
tery.
Never tie down or sling the truck by the control unit
or other points not designed for this.
CAUTION
Risk of damage to the truck.
Use a hoist and woven NON METALLIC slings with
an adequate lifting capacity. Refer to the load weight
shown on the truck's capacity plate.
The lifting operations must be performed by qualified
personnel.
Trucks are generally transported by road or by
rail.
Use
4
Handling the truck in specific situations
82 1152 801 15 17 EN - 02/2021 - 14