Still EXU-H-18, Original Instructions Manual, Page: 13 / 142

CE labelling
The manufacturer uses CE labelling to indi-
cate that the truck complies with the standards
and regulations valid at the time of marketing.
The supplied EC declaration of conformity
confirms this. The CE labelling is attached to
the nameplate.
An independent structural change or an addi-
tion to the tow tractor can compromise safety,
thereby invalidating the EC declaration of con-
formity.
The EC declaration of conformity must be
carefully stored and made available to the re-
sponsible authorities.
Copyright and property rights
This manual - and any excerpts thereof - may
not be reproduced, translated or transmitted in
any form to third parties without the express
written permission of the manufacturer.
CE-Symbol

Introduction
1
Your industrial truck
3 1152 801 15 17 EN - 02/2021 - 14