Still EXP 14, Original Instructions Manual

Page: 88 / 144

4
Use
Movement of the load
(1) CDG = distance "C" from the centre of
gravity of the load on the forks to the fork
carriage (in mm)
(2) h = lift height of the forks from the ground (in
mm)
(3) Maximum permissible loads "Q" (in kg)
Checks to be carried out before lifting
a load
WARNING
Never exceed the capacity of the truck. This ca-
pacity is based on the centre of gravity and the lift
height of the load.
Comply strictly with the load diagram! It is not
permitted to increase the capacity by adding extra
weight to the truck. Never exceed the maximum
loads shown! Otherwise, the stability of the truck
can no longer be guaranteed.
Transporting people in order to increase the capa-
city of the truck is prohibited.
.
Example
Weight of load to be
lifted:
1200 kg (3)
Distance between
the load centre of
gravity/fork carriage:
600 mm (1)
Permissible lift
height:
2600 mm (2)
WARNING
The illustrations are only examples.
Only the values stated on your truck’s plate should
be taken into consideration.
WARNING
If small items are being transported or if the load
exceeds the height of the fork carriage, a load
protective guard must be installed to prevent the
items from falling on the operator.
82 45758043402 [EN]