manualshive.com logo in svg

Still EXH-S 20, Original Instructions Manual, Page: 93 / 132

Share
Download
Still EXH-S 20 Original Instructions Manual Download Page 93

Handling the truck in specific situations

Slinging the truck 

 DANGER

Danger of truck falling
Only use slings and a hoist of sufficient quality.
Check the weight of the machine (including battery)

in order to choose a suitable device.
Refer to the technical features.

Observe the following instructions:

–

Lower the load arms (the initial lift must be

in the lowered position).

–

Switch off the truck and disconnect the bat-

tery connector.

–

Remove any items that could fall.

–

Protect all parts that come into contact with

the lifting device.

–

Attach the lifting device (1).

 NOTE

Do not sling the truck by the tiller. Do not sling

the truck by the accessory support.

–

Carefully lift the truck.

 DANGER

Risk of falling
Make sure no one is under or near the truck when

slinging the truck.

Use

4

Handling the truck in specific situations

 83

11538011751 EN - 02/2021  -  03

Summary of Contents for EXH-S 20





































































































































Reviews:

No comments