Still EXH 25, Original Instructions Manual, Page: 84 / 130

Changing the vertical access bat-
tery
To change the battery, proceed as follows:
–
Immobilise the truck.
–
Lower the load arms.
–
Switch off the ignition and remove the key.
–
Press in the emergency off switch.
–
Open the battery hood.
–
Disconnect the battery connector.
–
Attach the slinging hooks to the battery
compartment.
NOTE
Using secured hooks is recommended.
–
Lift the battery.
–
Replace the battery.
–
Position the new battery in the chassis.
–
Remove the slinging hooks.
–
Reconnect the battery connector.
–
Close the battery hood.
–
Return the truck to service.
Changing the side access battery
DANGER
Risk of trapping fingers
It is advisable to wear gloves when changing the bat-
tery.
WARNING
Risk of injury
Safety shoes must be worn when changing the bat-
tery.
Before handling, ensure that there is nobody around
the truck.
To remove the battery, we recommend that
you use a fixed roller frame or a truck with

Use
4
Handling the battery
76 11538011551 EN - 02/2021 - 08