–
Press the lower part (1) of the drive switch
(3) with your thumb.
–
The speed increases with the movement of
the drive switch.
–
When the drive switch is released, the truck
brakes electrically.
Reverse travel
–
Press the upper part (2) of the drive switch
(3) with your thumb.
–
The speed increases with the movement of
the drive switch.
–
When the drive switch is released, the truck
brakes electrically.
WARNING
Restricted visibility
During reverse travel, visibility may be restricted. Be
very careful. Make sure that the path behind is clear
before travelling in reverse.
Reversing the direction of travel
–
Push the drive switch in direction (1) or (2).
–
Release the drive switch.
–
Operate it progressively in the opposite di-
rection until the required speed is reached.
Steering
A long, centred and balanced tiller, fitted with
2 handles, directly controls the drive wheel.
The length of the tiller is designed for ride-on
driving.
WARNING
Risk of serious injury and/or serious damage to
equipment
Never use the truck with a defective steering system.
In a straight line, the tiller is centred.
To pivot the truck, proceed as follows:
Use
4
Driving
46
11538011551 EN - 02/2021 - 08
Summary of Contents for EXH 25
