Still EXG-10, Original Instructions Manual

Page: 63 / 152

Use
4
Handling loads
CAUTION
Always drive with the mast tilted as far back as
possible to ensure optimum distribution of the load
over the axles.
The axles will thus have better longitudinal stability
and maximum braking capacity.
CAUTION
The driver must remain as far as possible from the
truck (arms outstretched) in order to avoid injuring
his/her feet.
Do not travel with a load on the forks in the lower
limit stop position or on the load arms. The hydraulic
braking assistance no longer corresponds to the
weight of the moving unit.
DANGER
Never drive with the load in the upper position. It is
essential to lower the forks before setting off.
It is essential to slow down when approaching a
corner or on wet floors.
WARNING
Transporting people is strictly prohibited.
Setting a load down on the ground
– Carefully drive the machine to the required
location.
– Carefully move the load into the unloading
area.
– Lower the load until the fork arms are free.
– Withdraw the machine in a straight line.
CAUTION
Be careful not to touch nearby loads or those
around the truck.
DANGER
Personnel must not stand under or near the truck
when the load is in the raised position.
1170 801 15 09 [EN] 57