Still EXD-SF 20, Original Instructions Manual

Page: 78 / 150

4
Use
Transporting loads
Reading the capacity plate
CAUTION
Risk of loss of control
Before picking up a load, make sure that its weight
does not exceed the lifting capacity of the machine.
Refer to the nominal capacity specified on the
truck's capacity plate (1).
The values shown correspond to compact, homo-
geneous loads. They must not be exceeded. If they
are exceeded, the stability of the truck and the re-
sistance of the mast and the chassis are no longer
guaranteed.
The distance of the load centre of gravity from the
back of the fork and the lift height determine the
maximum load to be lifted. Check that the pallet is
in good condition.
Capacity of the EXD-SF 20 model
In pallet truck mode: 2000 kg
In pallet stacker mode: 1000 kg
In double pallet stacker mode: 1000 kg on
the forks (main lift) and 1000 kg on the load
arms (initial lift) if the truck is equipped with
controlled stabilisers
In double pallet stacker mode: 1000 kg on the
forks (main lift) and 800 kg on the load arms
(initial lift) if the truck is equipped with spring
stabilisers
Reading the capacity plate
Example with an EXD-SF 20 fitted with a
1844-mm duplex mast:
• 1: Maximum lift height: 1930 mm
• 2: Maximum mast capacity: 1200 kg with
a height of 1930 mm (centre of gravity:
400 mm)
• 3: Maximum mast capacity: 1200 kg with a
height of 1930 mm (centre of gravity: 500
mm)
• 4: Maximum mast capacity: 1200 kg with a
height of 1930 mm (centre of gravity: 600
mm)
• 5: Lift height: 1930 mm
• 6: Mast capacity: 1200 kg with a height of
1930 mm (centre of gravity: 400 mm)
68 11638011651 EN - 09/2019