Still EXD-S 20, Original Instructions Manual

Page: 79 / 144

Handling two stacked pallets
Double pallet stackers enable two stacked
loads to be transported:
- One load on the load arms (initial lift).
- One load on the forks.
DANGER
Risk of loss of stability
The overall weight of the two loads must not ex-
ceed the maximum capacity of the machine (refer
to the capacity plate).
The heavier load must be placed on the load arms.
Picking up two loads
–
Lower the load arms.
–
Raise the forks to the correct height to load
the upper pallet.
–
Carefully move the forks forward under the
pallet.
–
Raise the forks (1) to lift the first upper load.
–
Move slowly in a straight line to withdraw
the forks from the rack.
DANGER
Risk of hooking the mast on the rack
Do not start lowering the forks until they are com-
pletely clear of the rack. The operator must remain
vigilant and ensure that there are no obstacles pre-
venting the lowering of the forks.
–
Lower the forks to move the truck.
–
Lift the forks back to a suitable height (to
avoid all obstacles).
–
Carefully move forward in order to go and
get the second load.

Use
4
Transporting loads
69 11638011751 EN - 02/2021 - 03