Still EXD-S 20, Original Instructions Manual

Page: 49 / 144

When the key (2) is pressed, creep speed is
activated. The Tortoise symbol (1) will appear
on the display. Tortoise mode remains active
when the truck is switched off and on again.
To deactivate Tortue mode:
–
Press the key (2) again.
Tortoise mode is deactivated. The Tortoise
symbol (1) disappears.
Error code, Triangle, Hour meter and
Adjustable Spanner lights
The Error codes light (1) turns on in the event
of an error on the truck. Each error code is
identified by a letter followed by three num-
bers.
The Triangle light (2) turns on in the event of
an error code on the truck. It also comes on
when the battery charge level is too low.
The hour meter light (4) indicates the number
of operating hours for the truck. When the
symbol (3) is displayed, the truck indicates the
number of hours remaining before the battery
is discharged.
The Adjustable Spanner indicator light (5)
comes on to indicate the date of the next
maintenance.
- The symbol (5) starts to flash when mainte-
nance is required soon.
- The symbol (5) lights up continuously when
scheduled maintenance must be carried out
on the truck.

Use
4
Operation of the display operating unit
39 11638011751 EN - 02/2021 - 03