Still EXD 20, Original Instructions Manual

Page: 74 / 146

Reading the capacity plate
CAUTION
Risk of loss of control
Before picking up a load, make sure that its weight
does not exceed the lifting capacity of the machine.
Refer to the nominal capacity specified on the truck's
capacity plate (1).
The values shown correspond to compact, homoge-
neous loads. They must not be exceeded. If they are
exceeded, the stability of the truck and the resistance
of the mast and the chassis are no longer guaran-
teed.
The distance of the load centre of gravity from the
back of the fork and the lift height determine the
maximum load weight. Check that the pallet is in
good condition.
EXD20 capacity
In pallet truck mode: 2000 kg
In pallet stacker mode: 1000 kg
In double pallet stacker mode: 1000 kg on the
forks (main lift) and 1000 kg on the load arms
(initial lift)
Reading the capacity plate
Example with an EXD20 fitted with a duplex
mast of 1844 mm:
●
1: Maximum lift height: 1930 mm
●
2: Maximum mast capacity: 1200 kg with a
height of 1930 mm (centre of gravity:
400 mm)
●
3: Maximum mast capacity: 1200 kg with a
height of 1930 mm (centre of gravity: 500
mm)
●
4: Maximum mast capacity: 1200 kg with a
height of 1930 mm (centre of gravity: 600
mm)
●
5: Lift height: 1930 mm
●
6: Mast capacity: 1200 kg with a height of
1930 mm (centre of gravity: 400 mm)
●
7: Mast capacity: 1200 kg with a height of
1930 mm (centre of gravity: 500 mm)
●
8: Mast capacity: 1200 kg with a height of
1930 mm (centre of gravity: 600 mm)
●
9: Maximum lift height: 210 mm with
2000 kg in pallet truck mode


Use
4
Transporting loads
64 11638011551 EN - 02/2021 - 06