Still EXD 18, Original Instructions Manual

Page: 45 / 146

Checks and actions prior to commissioning
Start-up
–
Connect the battery connector, if necessa-
ry.
–
Keep the tiller in the vertical position.
–
Place the drive direction selector in the neu-
tral position (in the middle).
–
Insert the ignition key (1) and turn it to the
desired position or enter the 5-figure code
then validate using the # key on the digi-
code keyboard (default code = 00000).
NOTE
With the digicode option, when the key is
turned to the 0 position the truck is in tortoise
mode. The truck will function even if the key is
removed.
Selecting the driving mode
NOTE
The switch key can rotate to two different posi-
tions. These two positions choose the operat-
ing mode.
"Tortoise" position (2): gentle acceleration and
deceleration; maximum speed: 4 km/h.
"Hare" position (3): strong acceleration and
deceleration; maximum speed: 6 km/h.
–
Check the battery charge on the combined
indicator (4) and replace or charge the bat-
tery if necessary.
–
Turn the ignition key (1) to the "hare" posi-
tion (3) for normal driving mode.
NOTE
Perform a visual inspection of the truck before
starting.


Use
4
Checks and actions prior to commissioning
35 1160 801 15 51 EN - 02/2021 - 11