Still ECV 10 Original Instructions Manual Download

Page: 20 / 106

Technical description

This product has a compact chassis, 4-point

ground contact, balanced tiller and a micro-

processor electronic control system.The ma-

chine is lightweight, highly efficient and easy

to handle.

Design

The latest ergonomic and practical design,

adaptable to all operators and working condi-

tions.
The polyurethane cowling provides superior

stability and shock resistance, and has a vari-

ety of storage spaces.
The frame is made of thick steel plate and is

suitable for the harshest working conditions.

Steering system

Extremely smooth steering makes the vehicle

easier to manoeuvre in tight spaces.
A gas spring enables the tiller to quickly return

to the vertical position after it is released.

Tiller

The composite construction tiller head pro-

vides excellent impact resistance.
The ergonomic control layout is suitable for

left-handed and right-handed operators.
The horn, lifting and lowering devices can be

operated using one hand without changing

grip.
The anti-crush button integrated into the tiller

head protects the operator if the vehicle re-

coils.

Driving

The electronic control unit ensures comforta-

ble use and lower costs.
Precise control of driving speed.
Jolt-free starting and smooth acceleration to

maximum speed.
Simply release or turn the drive direction

switch to brake.
Booster circuit prevents the truck rolling back

when starting on a gradient.

Hydraulics

Gear pump driven by fully enclosed air-cooled

motor.
Safety valve and lowering brake protect the

hydraulic system.

Brake system

The electromagnetic brake with dust protec-

tion function can be used as a safety brake

and parking brake.Braking is controlled by the

drive controller, the brake's electromagnet

acts on the motor shaft and automatic braking

is activated when the tiller is in the horizontal

or vertical position (end stop brake).

Battery

It uses a large-capacity battery and the battery

charge can be viewed on the display unit.

Introduction

Technical description

50028011505 EN - 03/2022 - 06

Summary of Contents for ECV 10











































































































Search results

Summary of Contents for ECV 10

Reviews:

Related manuals for ECV 10

Brands by name

Popular brands

Still ECV 10, Original Instructions Manual

Search results

Summary of Contents for ECV 10

Reviews:

Related manuals for ECV 10

Brands by name

Popular brands