Still ECU-SF-20, Original Instructions Manual, Page: 13 / 92

Introduction
1
Applied equipment
Applied equipment
The forklift may be equipped with non-stan-
dard devices (example: clamp forks, rotating
forks).
It is necessary to contact the authorised sales
network for the application of such equipment,
in order to:
• verify feasibility
• install the equipment
• add a label with the new residual capacity is
• provide documentation on the equipment
(user and maintenance manual and EC
certificate).
CAUTION
The “crane arm” attachment changes the original
intended use of the forklift, which may not move
free-swinging suspended loads. For such applica-
tion, specific approval and the EC Declaration of
Compliance is required for the forklift equipped in
this manner. In this regard, it is necessary to con-
tact your authorized dealer.
User obligations
Users must comply with applicable local legis-
lation governing forklift use and maintenance.
Environmental considerations
Disposal of units and batteries during repair work
It may be necessary to exchange units as part
of maintenance work. Exchanged units must
then be disposed of.
The truck is made up of different materials.
Each of these materials must be
• disposed of,
• treated or
• recycled in accordance with regional and
national regulations.
NOTE
The documentation provided by the battery
manufacturer must be observed when dispo-
sing of batteries.
ENVIRONMENT NOTE
We recommend working with a waste mana-
gement company for disposal purposes.
45378043402 [EN] 7