Still ECU 15C Page 55 Original Instructions Manual Download

Page: 55 / 78

Operation

Operating instructions

NOTE

Before operating this truck, please follow the

warnings and safety instructions.

NOTE

Driving (travelling and lifting ) on a substan-

tially ﬁrm, smooth and prepared surfaces.

NOTE

Driving with the horizontal load centre of

gravity approximately on the longitudinal

centre plane of the truck.

WARNING

The working area of the industrial truck must be

adequately lit.
If it is insufﬁciently lit, working spotlights must be

installed to ensure that the driver can see properly.

– Insert the cap of the combined emergency

switch(3), turn it 90° clockwise and pull the

button up.

NOTE

The cap can be used only on this kind of

pedestrian power pallet truck.

NOTE

Make sure that the load is palletized and stable

and that the daily inspection is carried out.

1133 801 16 01 EN - 11/2018

Summary of Contents for ECU 15C















































































Search results

Summary of Contents for ECU 15C

Reviews:

Related manuals for ECU 15C

Brands by name

Popular brands

Still ECU 15C, Original Instructions Manual

Search results

Summary of Contents for ECU 15C

Reviews:

Related manuals for ECU 15C

Brands by name

Popular brands