Still ECH 15 Page 79 Original Instructions Manual Download

Page: 79 / 104

so keep them away from hot components and

naked flames.
Clean utensils must be used when refilling flu-

ids. It is strictly prohibited to mix different fluids

together (except where specifically indicated

in the operating instructions).
Make sure to protect against fluid splashes. In

the event of a fluid spillage, immediately cover

the spillage using an appropriate adsorbent

and dispose of the fluid/adsorbent mixture in

accordance with regulations.

Code

Designation

Applies to

Amount added

L-HM32

Hydraulic system

0.48 L

Grease (contains

MoS2)

Gearbox

100 g

Servicing

Pre-service preparations

Adopt all necessary safety measures to avoid

accidents during servicing. The procedure be-

low must be followed:

●

Park the truck correctly.

●

Pull the key switch and disconnect the bat-

tery plug out to prevent the truck from being

accidentally started.

●

If you need to work underneath a raised

truck, take effective measures to prevent

accidents such as the truck overturning or

slipping.

Maintenance

Servicing

5001 801 1555 EN - 12/2020

Summary of Contents for ECH 15









































































































Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands

Still ECH 15, Original Instructions Manual

Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands