Still ECH 15, Original Instructions Manual

Page: 57 / 104

Break-in period precautions
During the initial stage of putting the truck into
use, it should be operated with low loads.
Within the first 100 hours in particular, the fol-
lowing requirements should also be met:
–
Excessive discharge of a new battery dur-
ing initial use must be prevented.It should
generally be charged promptly when at
20%.
–
The specified preventive maintenance must
be done thoroughly.
–
Avoid sudden braking, driving quickly or
sharp turns.
–
Change oil or lubricant promptly according
to the instructions.
–
Limit the load weight to 70-80% of the rated
load.
CAUTION
When the truck is in the running-in stage (approx.
100 hours of operation), the equipment user should
check the fastening of the wheel nuts and bolts and
refasten them if necessary.
Key switch
The key switch (1) turns the control current on
and off.
Remove the key from the key switch to ensure
that the truck will not start accidentally.

Operation
4
Break-in period precautions
49 5001 801 1555 EN - 12/2020