Still ECH 15 Page 43 Original Instructions Manual Download

Page: 43 / 104

Safety information

DANGER

The truck must not be used by unauthorised per-

sons.
As the operating company, you must ensure that ac-

cess to the truck is only possible for authorised per-

sonnel.

DANGER

Safety systems are there for your safety.
Safety systems - of any kind - must never be disa-

bled.

DANGER

Loads should be arranged so that they do not

project beyond the edge of the truck loading sur-

face and cannot slip, topple over or fall off.
If necessary, use a load backrest (special equip-

ment).

CAUTION

Welding operations on other parts of the truck can

cause damage to the electronics.
Therefore, always disconnect the battery and all con-

nections to the electronic controls beforehand.

WARNING

The working area of the industrial truck must be ade-

quately lit.
If it is insufficiently lit, working spotlights must be in-

stalledto ensure that the driver can see properly

CAUTION

The functionality of medical equipment (e.g. pace

makers or hearing aids) may be impaired.
Check with a doctor or the medical equipment manu-

facturer that the equipment is sufficiently protected

against electromagnetic interference.

Safety

Safety guidelines

5001 801 1555 EN - 12/2020

Summary of Contents for ECH 15









































































































Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands

Still ECH 15, Original Instructions Manual

Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands