Still ECH 15 Page 32 Original Instructions Manual Download

Page: 32 / 104

Basic principles for safe operation

Insurance cover on company prem-

ises

The company premises are very often restric-

ted public traffic areas.

NOTE

It is advisable to review the operational liability

insurance so that insurance covers the truck

with respect to third parties in the event of

damage caused in restricted public traffic

areas.

Special features when using lithium-

ion batteries (variant)

The following special features apply for the

operating company and drivers when this in-

dustrial truck is equipped with a lithium-ion

battery (variant) in place of a conventional

lead-acid battery.

DANGER

Risk of explosion!
Heating to over 80°C, mechanical stress

and incorrect use may lead to the battery

exploding.

–

Never heat the battery to over 80°C or ex-

pose it to naked flames.

–

Do not subject the battery to excessive me-

chanical loads.

–

Do not climb on the battery.

–

Avoid impacts.

–

Do not open the battery.

–

Never short-circuit the battery connectors.

–

Do not connect the battery with the polarity

reversed.

Safety

Basic principles for safe operation

5001 801 1555 EN - 12/2020

Summary of Contents for ECH 15









































































































Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands

Still ECH 15, Original Instructions Manual

Search results

Summary of Contents for ECH 15

Reviews:

Related manuals for ECH 15

Brands by name

Popular brands