Still ECH 12C, Original Instructions Manual

Page: 14 / 114

Using the truck
Commissioning
Commissioning is the initial intended use of
the truck.
The necessary steps for the commissioning
vary depending on the model and equipment
of the truck. These steps require preparatory
work and adjustment work that cannot be per-
formed by the operating company. See also
the chapter entitled "Definition of responsible
persons".
–
To commission the truck, contact the au-
thorised service centre.
Intended use of the trucks
CAUTION
This machine was designed for the transport and
storage on racks (pallet stackers only) of loads
packed on pallets or in industrial containers designed
for this purpose.
The dimensions and capacity of the pallet or contain-
er must be adapted to the load being transported and
must ensure stability.
The table of characteristics and performance attach-
ed to this user manual gives you the information you
need to check that the equipment is suitable for the
work being carried out.
Any specific usage must be authorised by the site
manager; an analysis of the potential risks associ-
ated with this usage will enable him to put in place
any necessary additional safety measures.
Improper use
The operating company or driver, and not the
manufacturer, is liable for any hazards caused
by improper use.
NOTE
Please note the definition of the following re-
sponsible persons: "operating company" and
"driver".
Foreword
1
Using the truck
6 5001 801 1532 EN - 10/2021 - 03