Still CX, Original Instructions Manual

Page: 59 / 156

Overview
4
Options and variants
CX
20/CX-H CX-D 20
Optional
Dimensions
Cold store performance
Protection for intermittent use at -30°C
Reducer oil at -30°C
Special hydraulic fluid at -30°C
Cockpit panel heated using resistors
Steering regulator heated using resistors
Non-slip step plate and greased axles
Optional Optional
160 A SBE red with handle
Optional Optional
160 A DIN Rema with handle
Optional Optional
Red SBE 160 A with handle with air intake
Optional Optional
160 A with Rema DIN air intake with handle
Optional Optional
320 A SBE red with handle
Optional Optional
Power supply connector
Red SBE 320 A with handle with air intake
Optional Optional
Clipboard
Adjustable DIN A4-format mounted on the
accessory bar
Optional Optional
Charger socket Depending on the fixed battery socket Optional Optional
160 A, DIN 43589 Optional Optional
SBE 160 red Standard Standard
Fixed battery socket
SBE 320 red
Optional Optional
Electrically and mechanically set up on the
front part for scanner and 8.4" or 12.1" STILL
terminal including 24 V/5 A electrical power
supply, interface cable with a 3-pole socket
and a standard VESA75 bracket with holes.
Position: accessories bar on the motor side
Optional Optional
MMS Preparation
Rear part for terminal and 24 V power supply,
DIN connector plug and support on the
accessories bar on the fork side
Optional –
Hook
Fitted to the accessory bar
FleetManager Optional Optional
.
Overview of accessories
• Master code (factory setting "1 2 3 4")
• Key for battery compartment (2 items). With
its locking function, this key prevents the
battery cover from being opened so that
non-authorised persons cannot work on
the battery. This locking function can be
50108043405 [EN] 51