Still CX, Original Instructions Manual

Page: 114 / 156

6
Maintenance
General maintenance information
General maintenance information
General
These instructions contain all the information
required to perform the routine maintenance
on your fork truck. Carry out the maintenance
at the correct interval according to the main-
tenance chart to keep your truck ready for
operation, maintain its efficiency and prolong
its service life and to benefit from the warranty.
1044_001-001
Maintenance chart
The maintenance on the truck must be per-
formed according to the hour meter. Refer
to the maintenance chart for the services re-
quired at a particular interval.
The instructions describing the maintenance
procedures are located after the maintenance
chart.
In a dusty environment and with fluctuating
temperatures, reduce all lubrication and
maintenance intervals as required.
Quality and quantity of required lubri-
cants
Only use the lubricants specified in these
operating instructions.
The fluids and lubricants and other materials
required for the periodic maintenance of the
truck are listed in the table of maintenance
data.
Oils and greases of different grades may not
be mixed, as this affects lubricity. If changing
from one brand to another is unavoidable,
drain the previous oil particularly thoroughly.
Carefully clean the area surrounding a com-
ponent prior to filter renewal or working on the
hydraulic system.
Use only clean containers when replenishing
lubricants and other fluids!
106 50108043405 [EN]