Still CX-T-40 Original Instructions Manual Download Page 78

Page: 78 / 146

Operation

Driving

123

456

789

PRG

1047_003-020

Emergency stop brake

CAUTION

This brake may only be used in an emergency.

– Depress the emergency brake switch (6).
The truck is braked to a fast stop.
–

SToP

appears in the display (7).

NOTE

After the disappearance of

StoP

in the

display, press the

(ON) button (8) to restart

work.

123

456

789

PRG

1047_003-019

Parking brake

– Release traction control (1) or (2).
The truck is braked by the electromagnetic

brake.

Automatic shutdown

NOTE

If you leave the truck with the control turned

on, it will be shut off automatically after approx.

15 minutes. The truck can only be operated

again after the driver code is entered.

The delay time is adjustable. Please contact

your Service Engineer in this regard.

51048070007 [EN]

Summary of Contents for CX-T-40



















































































































































Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands

Still CX-T-40, Original Instructions Manual

Search results

Summary of Contents for CX-T-40

Reviews:

Related manuals for CX-T-40

Brands by name

Popular brands