Still CX-T-40, Original Instructions Manual

Page: 64 / 146

5
Operation
Commissioning
123 456 789
PRG
PRG
1044_505-001
1 2 3 4
5
6 7
Starting with FleetManager (op-
tional)
– Push the
I
key (START) (6). Do not pay
attention to the
Code
alert that appears in
the display
– Start the truck directly via the FleetManager
keyboard or reading device, depending on
the version.
1044_505-004
2
1
Hour meter
The display changes approx. 4-5 s after
powerup to show the operating hours (1) and
the hour-glass symbol (2). These are the total
number of hours since the commissioning
of the pallet truck. The meter always runs
when the pallet truck is driven or a load is
raised. Have the maintenance carried out
according to the service hours specified in the
maintenance schedule.
NOTE
The meter goes to 9999.
1044_505-005
%
3
Battery charge
– Press the
PRG ↑
(scrolling) button (4) to
display the available battery charge (3).
NOTE
After the battery is connected, the correct state
of charge appears only after about 1 minute.
The charge is shown in per cent and changes
in steps of 5 %.
56 51048070007 [EN]