Still 6219, Original Instructions Manual

Page: 233 / 540

Speed reduction when the fork car-
riage is raised (variant)
If the truck is equipped with this variant, the
driving speed is automatically reduced to
5 km/h (forwards and backwards) from a lift
height of more than 500 mm.
If the fork carriage is lowered below this lift
height again, the driving speed limitation is de-
activated.
NOTE
If the lift height measuring system is not work-
ing correctly, e.g. due to contamination of the
sensor, the driving speed is permanently limi-
ted to 5 km/h.
Speed reduction when the cab door
is open
WARNING
Risk of accident from sudden deceleration of the
truck
If the cab door is opened while the truck is in motion,
the truck brakes automatically.
–
Keep the cab door closed when driving.
With the "cab" equipment variant, the truck
has a cab door monitoring function via a sen-
sor. The signal from this sensor is linked with
the signal from the buckle switch in the control
electronics of the truck.
If the cab door is not closed and the seat belt
is not fastened, the driving speed is limited to
4 km/h. The message
Close cab door
or seat belt
appears in the display.
If the cab door is opened while the truck is in
motion, the truck brakes automatically to a
speed of 4 km/h. The message
Close cab
door
appears in the display.
If the seat belt is released with the cab door
closed, no message appears in the display.
Operation
4
Driving
217 56368011531 EN - 01/2021 - 05