Still 6219, Original Instructions Manual

Page: 198 / 540

Efficiency and drive modes
Blue-Q (variant)
Functional description
The Blue-Q efficiency mode affects both the
drive unit and the activation of the additional
consumers, and reduces the truck's energy
consumption. Blue-Q can be switched on and
off via a softkey.
If efficiency mode is switched on, the acceler-
ation behaviour of the truck changes to make
acceleration more moderate.
When travelling at low speeds, normally when
manoeuvring, no reduction is noticeable even
if efficiency mode is switched on. For moder-
ate speeds from approx. 7 km/h, acceleration
is gentler. Therefore, on distances of up to ap-
prox. 40 m, lower speeds are reached than
would be the case if the efficiency mode was
not activated. As in "STILL Classic" mode, the
maximum speed is 20 km/h.
has no influence on:
●
Maximum speed
●
Climbing capability
●
Pulling force
●
Braking characteristics
Effects on additional consumers
The following table shows the specific conditions that cause certain auxiliary devices to shutdown
when Blue Q is activated. The additional consumers available depend on the truck equipment.
Shut-off Seat switch Truck is stationary Drive direction
Front working spot-
light*
X X Reverse > 3 km/h
Rear working spotlight* X X Forwards
Roof spotlight* X X > 3 km/h
Headlight* X X -
Front wiper X X Reverse > 3 km/h
Rear wiper X X Forwards
Roof wiper X X -
Seat heater X - -
Cab heating X - -

Operation
4
Efficiency and drive modes
182 56368011531 EN - 01/2021 - 05