Still 5410, Original Instructions Manual

Page: 31 / 288

Decal information with the following data must
be permanently affixed to the truck so that it is
clearly visible:
●
Type of modification
●
Date of modification
●
Name and address of the company that car-
ried out the modification
Using attachments
The truck can be equipped with attachments.
Please ask your authorised service centre
about using these attachments. The following
points must be addressed during the consulta-
tion:
●
Is the attachment suitable for the truck?
●
How will the attachment affect the load ca-
pacity of the truck? A residual load capacity
rating plate must be created
CAUTION
Attaching a crane arm changes the original intended
use of the forklift truck, which may not be designed
for transporting free-swinging suspended loads. The
use of this kind of equipment requires specific appro-
val; the CE Declaration of Conformity is also required
for any forklift trucks fitted with this kind of equip-
ment. If this kind of equipment is to be used, you
must contact your authorised service centre.
Using working platforms
WARNING
The use of working platforms is regulated by national
law. The use of working platforms is only permitted
by virtue of the jurisdiction in the country of use.
–
Observe national legislation.
–
Before using working platforms, consult the na-
tional regulatory authorities.
Introduction
1
Using attachments
21 5001 801 1625 EN - 05/2022 - 03