Stihl TS 410, Instruction Manual, Page: 32 / 40

21 Maintenance and Care
The following intervals apply for normal operating
conditions. The specified intervals must be short‐
ened accordingly when working for longer than
normal or under difficult cutting conditions (exten‐
sive dust, etc.).
Before starting work
At the end of work and/or daily
Whenever tank is refilled
Weekly
Monthly
Annually
If faulty
If damaged
As required
Complete machine Visual inspection (con‐
dition, leaks)
X X
Clean X
Controls Function test X X
Manual fuel pump (if
present)
check X
Have repaired by a
specialist dealer
1)
X
Fuel pickup body in fuel
tank
check X
replace X X X
Fuel tank Clean X
V-ribbed belt Clean / re-tension X X
replace X X
Air filter (all filter compo‐
nents)
change Only if there is a noticeable loss of engine power
Cooling air intake slits Clean X
Cylinder fins Have cleaned by
dealer
1)
X
Spark arresting screen in
muffler
Check if installed X
Check or replace 1)
X
Water attachment check x x
Have it repaired by a
specialist dealer
1)
x
Carburetor Check idle adjustment
– abrasive cutting
wheel must not rotate
X X
Readjust idle speed X
Spark plug Adjust electrode gap X
Replace after
100 operating hours
All accessible screws,
nuts and bolts (not
adjusting screws)
Tighten X X
Anti-vibration elements check X X X
Have replaced by serv‐
icing dealer
1)
X
Cutting wheel Check X X
1)
STIHL recommends STIHL servicing dealer
English 21 Maintenance and Care
32 0458-370-8321-C