Stihl TS 410, Instruction Manual, Page: 24 / 40

WARNING
Pressure may have built up in the canister –
open it carefully.
► The fuel tank and the canister in which fuel
mixture is stored should be cleaned thoroughly
from time to time
Residual fuel and the liquid used for cleaning
must be disposed of in accordance with regula‐
tions and without harming the environment!
12 Fueling
12.1 Preparing the machine
► Before fueling, clean the filler cap and the area
around it so that dirt cannot fall into the tank
► Always position the machine so that the filler
cap is facing upwards
WARNING
Never use a tool to open the bayonet filler cap.
The cap can be damaged and fuel may escape.
12.2 Opening the twist lock
1.
2.
370BA093 KN
► Press the filler cap down as far as possible by
hand, then turn it counterclockwise
(approx. 1/8 turn) and remove
12.3 Refueling
Take care not to spill fuel while fueling and do
not overfill the tank. STIHL recommends use of
the STIHL filling system for fuel (special acces‐
sory).
12.4 Closing the filler cap
370BA094 KN
1.
2.
► Fit the cap and turn it until it engages in the
bayonet catch
► Press the cap down as far as possible with
your hand and turn it clockwise (approx.
1/8 of a turn) until it engages properly
12.5 Checking the lock
370BA095 KN
► Grip the cap – the cap is closed properly if it
cannot be removed and the markings (arrows)
on the cap and fuel tank are aligned
If the cap can be removed or the markings do not
align, close the cap again – see sections "Clos‐
ing the cap" and "Checking the lock".
English 12 Fueling
24 0458-370-8321-C