Stihl SP-KM, Instruction Manual

Page: 11 / 20

SP-KM
English
9
N
Engage the combination wrench (3)
on the hexagon (4) at the base of
tine (1).
N
Use the combination wrench (3) to
tighten down the tine (1) firmly by
turning it another 30° to 40°.
N
Remove the combination wrench
from the tine.
N
Push the lug (1) on the drive tube
into the slot (2) in the coupling
sleeve as far as stop.
When correctly installed, the red line (3)
(arrow point) must be flush with the end
of the coupling sleeve.
N
Tighten down the star knob (4)
firmly.
Removing the KombiTool
N
Reverse the above sequence to
remove the drive tube.
The type and style of the harness,
carrying ring and carabiner (spring hook)
depend on the market.
Shoulder Strap
N
Put on the shoulder strap (1).
N
Adjust the length of the strap so that
the carabiner (2) is about a hand’s
width below your right hip.
414BA026 KN
16 mm
2
4
1
3
414BA024 KN
1 3
Mounting the KombiTool
1
002BA326 KN
2
3
002BA327 KN
4
Fitting the Harness
1
002BA374 KN
2