background image

0458-660-0121-A

10

English 

4 Safety Precautions

■ An incorrectly routed connecting cord or extension cord 

may be damaged and people may trip over it. People may 

be injured and the connecting cord or extension cord may 

be damaged.
► Route and mark the connecting cord and extension cord 

so that people will not trip over them.

► Route the connecting cord and extension cord so that 

they will not be damaged or crushed, chafed or tangled.

► Lay the connecting cord and extension cord on a dry 

surface.

■ The extension cord warms up in operation. If that heat 

cannot escape, it may cause a fire.
► If using a cable reel: Completely unroll the cable reel.

■ If an electric power tool with too high a power consumption 

is connected to the socket of the wet and vacuum cleaner, 

electrical components may heat up and cause a fire. This 

can result in serious injuries or death and damage to 

property.
► Make sure that the maximum power rating of the electric 

power tool does not exceed the maximum power 

consumption of the socket, 

@

17.1.

4.9 Transport

WARNING

■ The wet/dry vacuum cleaner may topple over or move 

during transport. This can result in injuries and damage to 

property.
► Unplug the mains plug of the wet/dry vacuum cleaner 

from the socket.

► Empty the container and dispose of its contents in 

accordance with the applicable regulations.

► Transport the wet/dry vacuum cleaner upright.
► Engage the front wheel brake.
► Secure the wet/dry vacuum cleaner so that it cannot 

topple over and cannot move.

4.10 Storage

WARNING

■ Children are not aware of and cannot assess the dangers 

of the wet/dry vacuum cleaner. Children can be seriously 

injured.
► Unplug the mains plug of the wet/dry vacuum cleaner 

from the socket.

► Store the wet/dry vacuum cleaner out of the reach of 

children.

■ Moisture may cause the electrical contacts on the wet/dry 

vacuum cleaner and metal components to corrode. The 

wet/dry vacuum cleaner may be damaged.
► Unplug the mains plug of the wet/dry vacuum cleaner 

from the socket.

► Store the wet/dry vacuum cleaner in a clean, dry state.

4.11 Cleaning, servicing and repairs

WARNING

■ If the mains plug is plugged into a socket when carrying 

out cleaning, servicing or repairs, it is possible for the wet/

dry vacuum cleaner to be switched on inadvertently. This 

can result in serious injuries and damage to property.
► Unplug the mains plug of the wet/dry vacuum cleaner 

from the socket.

■ Harsh detergents, pressure washers or sharp objects can 

damage the wet/dry vacuum cleaner. If the wet/dry 

vacuum cleaner is not properly cleaned, parts may not 

function correctly and safety devices can be disabled. 

People can be seriously injured.

Summary of Contents for SE 133 ME

































Reviews: