Stihl RMI 632, Instruction Manual

Page: 43 / 90

EN
41
0478 131 8349 A - EN
4. Drive to docking station:
The robotic mower travels back
to the docking station and
charges the battery. If automatic
mowing is switched on, the robotic mower
will mow the mowing area again at the next
possible active time.
5. Manual mowing:
Manual lawn mowing.
For safety reasons, the mowing
blade can only be activated if the
OK button is pressed and held and the
Mow button is then pressed. Steering is
performed using the control pad. (
Ö 15.6)
6. Start mowing:
The robotic mower starts the
mowing operation automatically
following activation. The end of
the mowing operation must be specified.
If a
secondary area was installed, after
pressing the OK button it is necessary to
define whether mowing is taking place on
a secondary area or on the main area.
(
Ö 12.10)
The standard setting for the duration of the
mowing operation can be modified under
"Mowing time" in the machine settings.
(
Ö
11.10)
7. Start time-delayed mowing:
The robotic mower starts the
mowing operation automatically,
but with a time delay, following
activation. The start and end times of the
mowing operation must be specified.
If a
secondary area was installed, after
pressing the OK button it is necessary to
define whether mowing is taking place on
a secondary area or on the main area.
(
Ö 12.10)
The standard settings for the duration of
the mowing operation and for the delay
can be changed in the machine settings
under "Mowing time" and "Delay".
(
Ö 11.10)
8. Skip next active time:
This command can be used if the
robotic mower is not to be
operated during the next active
time (e.g. in the case of a garden party).
Following confirmation, no mowing will
take place during the next active time.
Active times which have been cancelled in
this manner are greyed out in the mowing
plan. They can be released for mowing
again in the "Active times" menu. ( Ö 11.7)
If the command is performed several times
in succession, the next active time is
always skipped. If no active times remain
for the current week, the message "No
mowing will take place next week"
appears.
9. Edge mowing:
Following activation, the robotic
mower mows the edge of the
mowing area. After completing
one circuit, it travels back to the docking
station and charges the battery.
11.6 Mowing plan
The stored mowing plan can be
called up via the "Mowing plan"
menu in the main menu. The
rectangular blocks beneath the respective
days represent the saved active times.
Mowing is possible in active times marked
in black. Grey blocks represent active
times without mowing operations – e.g. in
the case of a disabled active time or
following the command "Skip active time".
(
Ö 11.5)
RMI 632 C, RMI 632 PC:
Automatic mowing can also be
switched on and off using the app.
The robotic mower returns to the
docking station when automatic
mowing is switched off using the
app. (
Ö 10.)
RMI 632 C, RMI 632 PC:
The robotic mower can also be sent
back to the docking station using
the app. (
Ö 10.)
In the main menu (
Ö
11.4),
the command "Start mowing"
can also be activated by
pressing the
Mow button .
If an external docking station with a
corridor was installed, bring the
robotic mower to the mowing area
before activation of the command
"Start mowing".
RMI 632 C, RMI 632 PC:
"Mowing start" can also be
activated in the app. (
Ö 10.)
If an external docking station with a
corridor was installed, bring the
robotic mower to the mowing area
before activation of the command
"Start time-delayed mowing".
When automatic mowing is
switched off, the entire mowing plan
is disabled and all active times are
shown in grey.