Stihl RMA 510 V, Instruction Manual

Page: 23 / 96

0458-819-9921-A
21
English
13 Checking the Lawn Mower and Battery
12.2 Deactivating Drive System
► Release the control bar for self-propulsion.
► Wait until the mower comes to a standstill.
► If the mower does not stop: Pull out the activation key,
remove the battery and consult a STIHL specialist dealer
for assistance.
There is a malfunction in the mower.
13.1 Checking the Controls
Lockout button and switch lever for blade drive
► Pull out the activation key.
► Remove the battery.
► Depress the lockout button and release it again.
► Pull the switch lever for blade drive fully in direction of
handle and release it again.
► If the lockout button or switch lever for blade drive is stiff
or does not spring back to the idle position: Do not use
your mower and contact your STIHL servicing dealer for
assistance.
There is a malfunction in the lockout button or switch
lever.
Switch lever for wheel drive
► Pull out the activation key.
► Remove the battery.
► Pull the switch lever for wheel drive fully in direction of
handle and release it again.
► If the switch lever for wheel drive is stiff or does not spring
back to its idle position: Do not use your mower and
contact your STIHL servicing dealer for assistance.
There is a malfunction in the switch lever for wheel drive.
Lever
► Pull out the activation key.
► Remove the battery.
► Move lever to , and then to .
► If the lever moves too freely: Do not use your mower and
contact your STIHL servicing dealer for assistance.
The lever is defective.
Switching on the mower
► Insert the activation key.
► Fit the battery.
► Depress the lockout button with your right hand and hold
it there.
► Pull the switch lever for blade drive fully in direction of the
handle with your left hand and hold it so that your thumb
is wrapped around the handle.
The blade rotates.
► If 3 LEDs flash red: Remove the activation key and
battery, and contact your STIHL servicing dealer for
assistance.
There is a malfunction in the mower.
► Release lockout button and switch lever for blade drive.
The blade stops rotating after a brief delay.
► If the blade continues to rotate: Remove the activation key
and battery, and contact your STIHL servicing dealer for
assistance.
There is a malfunction in the mower.
Switching on wheel drive
► Insert the activation key.
► Fit the battery.
► Pull the switch lever for wheel drive fully in direction of the
handle and hold it so that your thumb is wrapped around
the handle.
The mower begins to move forwards.
► Release the switch lever for wheel drive.
The mower comes to a standstill.
► If the mower does not stop: Remove the battery and
contact your STIHL dealer for assistance.
There is a malfunction in the mower.
13 Checking the Lawn Mower and Battery