Stihl RE 150 PLUS, Instruction Manual, Page: 3 / 28

3 Overview
3.1 Pressure washer
11
18
19
2
3
4
5
6
16
15
7
8
9
14
13
12
11
10
17
17
17
#
0000-GXX-9163-A0
1 Rotary control
The rotary control is used to set the working
pressure and water flow rate.
2 Connecting cord
The connecting cord connects the pressure
washer to the mains plug.
3 Mains plug
The mains plug connects the connecting cord
to a socket.
4 Holder with clip
The holder serves to remove and store the
connecting cord and can be rotated. The clip
attaches the mains plug to the coiled connect‐
ing cord.
5 Trigger switch lockout
The trigger switch lockout blocks the adjust‐
ment of the handle.
6 Crank
The crank is used to turn the hose reel
7 Hose reel
The hose reel is used to roll up the high-pres‐
sure hose.
8 High-pressure hose
The high-pressure hose transports the water
from the high-pressure pump to the spray
gun.
9 Guide opening
The guide opening guides the high-pressure
hose from the front onto the hose reel.
10 Connector
The connector connects the high-pressure
hose with the spray gun.
11 Rotary switch
The rotary switch is used to switch the pres‐
sure washer on and off.
12 Dosing handle
The dosing handle is used to set the desired
dosage of cleaning agent.
13 Pressure gauge
The pressure of the high-pressure pump is
indicated by the pressure gauge.
14 Flap
The flap covers the supplied nozzles and
cleaning needle.
15 Connector
The connector is used to connect the water
hose.
16 Carrying handle
The carrying handle is used to carry the pres‐
sure washer.
17 Support
The supports are used to store the spraying
equipment.
18 Handle
The handle is used when carrying and mov‐
ing the pressure washer.
19 Detergent container
The detergent container is used for cleaning
with cleaning agent.
# Rating plate with serial number
3 Overview English
0458-663-0121-C 3