Stihl RE 120, Instruction Manual, Page: 19 / 28

► Carry the pressure washer by the handle (1)
and the carrying handle (2).
Transporting the pressure washer in a vehicle
► Secure the pressure washer so that it cannot
topple over and cannot move.
► If the pressure washer cannot be transported
in a frost-proof environment: Protect pressure
washer using antifreeze.
14 Storing
14.1 Storing the pressure washer
► Switch off pressure washer and unplug mains
plug from the socket.
► The pressure washer should be stored in such
a way that the following conditions are fulfilled:
–
The pressure washer is out of the reach of
children.
–
The pressure washer is clean and dry.
–
The pressure washer is in an enclosed
room.
–
The pressure washer is in a temperature
range above 0 °C.
–
If the pressure washer cannot be protected
from frost in storage: Protect the pressure
washer with antifreeze.
15 Cleaning
15.1 Cleaning the high-pressure
washer and accessories
► Switch off the high-pressure washer and pull
the mains plug out of the socket.
► Clean the high-pressure washer, high-pres‐
sure hose, spray gun and accessories with a
damp cloth.
► Clean the connectors and couplings on the
high-pressure washer, high-pressure hose and
spray gun with a damp cloth.
► Clean vents with a paintbrush.
15.2 Cleaning nozzle and spray
lance
0000098883_A1
► Rinse the nozzle and spray lance under run‐
ning water and dry with a cloth.
0000-GXX-4370-A0
► If the nozzle is clogged: Clean the nozzle with
the cleaning pin.
15.3 Cleaning the water intake
screen
1
2
0000-GXX-5092-A0
► Unscrew connector (1) of water connection.
► Pull water intake screen (2) out of water con‐
nection.
► Flush water intake screen (2) under running
water.
► Insert water intake screen (2) into water con‐
nection.
► Screw on connector (1) and tighten it by hand.
15.4 Cleaning the water filter
The water filter must be disassembled to clean it.
5
1
0000-GXX-4373-A0
2
3
1
4
► Remove gasket (1) from the fastener (2).
► Unscrew fastener (2) from filter housing (5).
► Remove gasket (3) from the fastener (2).
► Remove filter (4) from the filter housing (5).
► Rinse gaskets (1 and 3), fastener (2) and fil‐
ter (4) under running water.
► Grease the gaskets (1 and 3) with grease for
fittings.
► Reassemble the water filter.
14 Storing English
0458-836-0121-A 19