FS 460 C-M, FS 460 C-M L
English
27
The machine will balance differently
depending on the cutting attachment
mounted.
N
Let the machine swing on the
harness until it stops moving –
change the connection point if
necessary
Hanging positions
Mowing heads, grass cutting blades and
brush knives should rest lightly on the
ground.
Circular saw blades should "hover"
approx. 8 in. (20 cm) above the ground.
Putting down the machine in an
emergency
Controls
1
Throttle trigger lockout
2
Throttle trigger
3
Stop switch with
Run
and
Stop
positions. Push the stop switch (
h
)
to switch off the ignition.
Function of stop switch and ignition
system
The stop switch is normally in the
Run
position: Ignition is on in this position –
the engine is ready to start and may be
started. The ignition is switched off when
the stop switch is depressed. It is
automatically switched on again after
the engine comes to a standstill.
Balancing the
Trimmer/Brushcutter
6BA009 KN
6BA010 KN
As soon as it becomes apparent
that a dangerous situation is
developing, the machine must be
put down quickly. Practice setting
down the machine quickly. In
order to avoid damage, when
practicing, do not throw the
machine on the ground.
Starting / Stopping the
Engine
1
002BA392 KN
2
3
Summary of Contents for Operating instructions
Page 2: ...Instruction Manual 1 47 Manual de instrucciones 49 99 ...
Page 50: ...FS 460 C M FS 460 C M L English 48 ...
Page 102: ...FS 460 C M FS 460 C M L español EE UU 100 ...
Page 103: ......
