![background image](http://html1.mh-extra.com/html/stihl/ms-201-c-m/ms-201-c-m_instruction-manual_1378751046.webp)
MS 201 C-M
English
44
EPA / CEPA
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Category
Engine
Single cylinder two-stroke engine
Ignition System
Electronic magneto ignition
This spark ignition system meets all
requirements of the Canadian
Interference-Causing Equipment
Standard CAN ICES-2/NMB-2.
Fuel System
All position diaphragm carburetor with
integral fuel pump
Chain Lubrication
Fully automatic, speed-controlled oil
pump. Additional manual oil flow control
Weight
Cutting Attachment
Actual cutting length may be less than
the specified length
Rollomatic guide bars
Carving guide bars
3/8" Picco chains
1/4" chains
Chain Sprockets
Specifications
A = 300 hours
B = 125 hours
C = 50 hours
Displacement:
35.2 cc
Bore:
40 mm
Stroke:
28 mm
Engine power to
ISO 7293:
1.8 kW (2.4 bhp)
at 10,500 rpm
Idle speed:
3,000 rpm
Max. permissible
speed (with cutting
attachment):
14,000 rpm
Spark plug (resistor
type):
NGK CMR 6 H
Electrode gap:
0.5 mm
Fuel tank capacity:
310 cc (0.31 l)
Oil tank capacity:
220 cc (0.22 l)
dry, without bar and chain
MS 201 C-M
4.0 kg
Bar lengths (3/8" P
pitch):
30, 35, 40 cm
Groove width:
1.3 mm
Bar lengths
(1/4" pitch):
30 cm
Groove width:
1.3 mm
Picco Micro 3 (63 PM3) Type 3636
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.3 mm
Picco Super (63 PS) Type 3617
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.3 mm
Picco Super 3 (63 PS3) Type 3616
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.3 mm
Picco Duro 3 (63 PD3) Type 3612
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.3 mm
Picco Micro (63 PM) Type 3613
Pitch:
3/8" P
(9.32 mm)
Drive link gauge:
1.3 mm
Rapid Micro Spezial (13 RMS)
Type 3661
Pitch:
1/4" (6.36 mm)
Drive link gauge:
1.3 mm
6-tooth for 3/8" P (spur sprocket)
Max. chain speed accord
-
ing to ISO 11681:
26.0 m/s
Chain speed at maximum
power:
18.6 m/s