MS 201 C-M
English
31
If the groove is not at least this deep:
N
Replace guide bar
Otherwise the drive links will grind
against the base of the groove – the
bottoms of the cutters and the tie straps
will not lie against the bar.
If there is a noticeable loss of engine
power
N
Turn the twist lock 90°
counterclockwise.
N
Remove the shroud upwards.
N
Remove the air filter upwards.
N
Wash the filter in STIHL special
cleaner (special accessory) or a
clean, non-flammable solution (e.g.
warm soapy water) and then dry.
NOTICE
Do not clean a fleece filter (option) with
a brush.
Always replace a damaged filter.
Exhaust emissions are controlled by the
design of the engine and components
(e.g. carburation, ignition, timing and
valve or port timing).
Picco
3/8“ P
5.0 mm
Rapid
3/8“; 0.325“ 6.0 mm
Rapid
0.404“
7.0 mm
Cleaning the Air Filter
001
1BA052 KN
001
1BA015 KN
Engine Management
